Linear MCT-11 MegaCode 1-Channel garage door opener 318mhz

Help, Troubleshooting, and Instructions

Linear Help, Troubleshooting, and Instructions

1 Btn Remotes Help

Linear MCT-11 megacode garage door opener

318mhz megagcode (no dip switches to set) MegaCode transmitters and receivers do not contain a typical "coding switch". Each transmitter is permanently coded at the factory. The transmitter sends a unique code when the button is pressed. The receiver is programmed by learning a transmitter's unique digital code. The receiver will activate only from the memorized transmitters.
• It has a high visibility test/operate LED
• A spring-steel, dual-position visor clip that attaches vertically or horizontally.

  

• It measures 3.04-by-1.93-by-.61 inches.
• It is available for use with all Linear?s garage door openers.
• The transmitter is powered by two Type CR2032 coin-cell batteries.

Compatible items by Linear

• Linear Receiver 1 Channel Internal with Solid State Output MDRM
• Linear Receiver 2 MegaCode 2 Channel MGR 318MHz
• Linear Receiver MegaCode 1 Channel MGR 318 MHz
• Linear Receiver MegaCode 1-Channel extended SMDRG
• Linear Receiver MegaCode 1-channel Plug-in MDR-U
• Linear Receiver MegaCode 1-channel gate MDRG
• Linear Receiver megacode MDR